THE INFLUENCES OF SUGARCANE BAGGASSE ASH ON SOME PROPERTIES OF RECYCLED POLYETHYLENE HDPE

Student: Sani Sadiq
Supervisor: Mr Mahdi Sani
HOD: Mr Mahdi Sani
Department of Metallurgical Engineering
Engineering
Waziri Umaru Federal Polytechnic, Birnin Kebbi, Kebbi State

Abstract

ABSTRACT The influences of sugarcane bagasse on some properties of recycled polyethylene were investigated. The blended samples were produced by two roll mill machine and the sample. Studies of physical and mechanical properties such as density, water absorption, tensile strength, and hardness were carried out. The study showed that the density decreases while water absorption increased with increase and decrease in the percentage of HDPE/BGS. The Hardness increased as the content is increased up to 100/0 composition then the tensile strengths dropped continuously as the content BGS increased in the blends. In conclusions this work shows successful blending of HDPE/BGS and REPS, this shows that biodegradable BGS can be achieved by blending plastic materials with HDPE/BGS.

Full-Text Access Notice

In accordance with the NERD Policy on promoting peer-reviewed publication, public access to the full text of a project, thesis or dissertation is restricted for three years, allowing the author and supervisors sufficient time to pursue peer-reviewed publication. During this period, researchers with legitimate academic or research purposes may request authorisation directly from the author to enable NERD to release the indexed full texts of the work using the form below.

Request authorisation from the author